Nukote EP Prime II

Nukote EP Prime II is two component, high solids, liquid applied, low viscosity epoxy-polyamine primer surfacer with unique penetrating characteristics. It helps to seal the pores and capillaries and minimize out gassing


  • High solids with low VOC
  • Low Odor
  • Excellent Adhesion
  • Low Viscosity
  • Long open time.

Typical uses:

  • Concrete
  • Masonry
  • Cement renders


Grey: Part-A: Black, Part-B: White


2-gallon (7.6-liter) kit: One 1-gallon (3.78-liter) can of Part-A black liquid and one 1-gallon (3.78-liter) can of Part-B white liquid.

10-gallon (38-liter) kit: One 5-gallon (19-liter) pail of Part-A black liquid and one 5-gallon (19-liter) pail of Part-B white liquid.

Download documents


Nukote EP Prime II PDS
pds document


Nukote Coating Systems International, a Nevada, USA Corporation warrants that the two components of this product shall conform to the technical specifications published in the product literature. The quality and fitness of the product is dependent upon the proper mixture and application of the components by the applicator. Nukote Coating Systems has no role in the application of the finished polymer other than to manufacture and supply its two components. It is vital that the person applying this product understands the product and is fully trained and certified in the use of plural component equipment and application of plural component materials. There are no warranties that extend beyond the description on the face of this instrument, except when provided in writing, directly by Nukote Coating Systems International and executed under seal by a company officer.


NUKOTE COATING SYSTEMS INTERNATIONAL maintains a vast library of technical and marketing data for use by our staff, affiliated companies and key clients.

If you are not an NCSI staff member or contract affiliate and wish to access the data, please send us a request form and we will revert within 48-hours.

Our product range is derived from our proprietary and/or patented chemical formulations. We formulate products specific to application requirements modifying the products properties to improve and enhance performance in a variety of variable conditions, including abrasion resistance, chemical resistance, saltwater resistance, impact resistance, ultraviolet exposures, and so on. This provides our clients with unique solutions to their specific requirements and allows us to provide products designed specifically for oil and gas, construction, infrastructure, power generation and even entertainment industries.

The products represented below do not comprise the full breadth of our range of products but are limited to the most commonly specified formulations in our range. Many of our products are defined to exact requirements of a manufacturer or end-user and are thus not included in our electronically published data. Please click on the link below to access the data sheets incorporated into this site. For specific questions regarding product selection contact us directly at any of our regional locations.